Check for gas cylinder leaks

  1. Use soapy water to spray the connection joint. If bubbles appear, there is a leak.
  2. Tighten the connection and then retest.
  3. If bubbles still appear, isolate the gas.
  4. Arrange for a licensed gas fitter to repair it or replace it.
Provided by: Department for Energy and Mining
Page last updated 1 March 2024

Provided by:
Department for Energy and Mining
URL:
https://www.sa.gov.au/topics/energy-and-environment/safe-energy-use/using-gas-appliances-safely/lpg-cylinders-and-fittings/check-for-gas-cylinder-leaks
Last Updated:
01/03/24
Printed on:
01/05/24
Copyright statement:
SA.GOV.AU is licensed under a Creative Commons Attribution 4.0 Licence. © Copyright 2024
Close